• Dây chuyền máy sản xuất Gòn cuộn, gòn chần

    - Mã sản phẩm: Dây chuyền sản xuất gòn cuộn, gòn chần

     

    Spray bonded and Non-adhesive Cotton Production Line 3600mm

    Thermal bonding wadding production line

     

    1. SN-YK015B-130 Pre opener              1 sets 
    Technical Specification:
    1) Working width: 1300mm
    2) Capacity: 100-250kg/h
    3) The main cylinder is covered with sheep horn tooth, which is 460mm in diameter
    4) The driving motor of the cylinder is 5.5kw, and the max rotating speed is 900r/min
    5) The feeding motor is 1.1kw 
    6) With 4.5# fan to transmit and the fan motor is 2.2kw
    7) Length of the conveying belt is 6m
    8) Installed power: 8.8kw
     
     
    2. SN-JK015B-130 Main opener                          1 set
    Technical Specification:
    1) Working width: 1300mm
    2) Capacity: 100-250kg/h
    3) The main cylinder is covered with pin board, which is 460mm in diameter
    4) The driving motor of the cylinder is 5.5kw and the max rotating speed is 900r/min
    5) Feeding motor is 1.1kw 
    6) With ten-angle plate and two straight rollers to feed
    7) With 4.5# fan to transmit and the fan motor is 2.2kw
    8) Installed power: 8.8kw
     
     
    3. SN-JM015B-170 Vibrating hopper feeder                1 sets
    Technical Specification:
    1) Working width: 1700mm
    2) Capacity: 150-200kg/h
    3) The frame is made from Q235A-8mm steel sheet
    4) The diameter of the stripper and evener roller is φ40, which is equipped with 3φ300mm cast and galvanized flanges. 4 beaters are fixed on the roller by bolts
    5) The spike lattice and evener roller share one 1.5kw motor (with worm reducer). The stripper roller and oscillating deck share one 0.75kw-6 motor
    6) Photo electrically linked with the main opener
    7) Installed power: 2.25kw
     
     
    4. SN-SLC1D2015B1-185 Single cylinder double doffer carding machine                                             1 set
    Technical Specification:
    1) Working width: 1850mm
    2) Capacity: 150-200kg/h (based on 6D*51mm fiber)
    3) Output speed: 20-40m/min
    4) Diameter of the main cylinder φ1230mm, doffer is φ492mm, working roller is φ165mm, stripper roller is φ86mm
    5) Four roller to feed and with metal protection device. The feeding motor is 1.5kw, frequency controlled
    6) The main cylinder is adapted with 15kw motor
    7) The bearing of main cylinder and licker-in roller is Timken bearing
    8) Doffer, random, stripper roller and working roller of the cylinder share one 3kw motor
    9) Installed power: 19.5kw
     
    5. SN-P015B-200*420 Cross lapper                      1 sets
    Technical Specification:
    1) Input width: 2000mm
    2) Output width: 4200mm
    3) Input speed: 40m/min (max)
    4) Output speed: 6m/min (max)
    5) The bottom lattice is the wooden one, the others are all PVC ones
    6) The reciprocation is controlled by the timing belt and the motor is 2.2kw.
    7) The bottom lattice is lifted manually
    8) All frequency controlled and with position switches 
    9) Installed power: 7.4kw
     
     
    6. SN-PC015B-420*900 Oven       1 set
    Technical Specification:
    1) Working width: 4200mm
    2) Length of the oven:9m, each section is 4.5m in length and there are 2 sections
    3) Weight of the product: 100-500g/㎡
    4) Heating method: gas burner (diesel or natural gas)/ electrical heating (depend on customer)
    5) Linear speed: 16m/min (max)
    6) With two sections and three layers, and also with four nozzle pipes
    7) Installed power: 54.7kw
     
    7. SN-RZ015B-380 Two roller ironing machine 1 set
    Technical Specification:
    1) The ironing roller material is stainless steelφ570*3mm.
    2) Length of the roller: 3800mm
    3) The frame is made from Q235A steel sheet and welded
    4) Temp.:220℃(max)
            Digital display and automatic   
            temperature control.
    5) Linear speed: 16m/min (max), 
    6) Heating method: electrical heating or heating by conduction oil (heating power 54kw)
    7) The upper roller is lifted manually
    8) Transmission power: 2.2kw, frequency controlled
     
     
    8. SN-PC015B-380 Slitting and winding machine                 1 set
    Technical Specification:
    1) Length of the roller:3800mm
    2) Diameter of the roller: 300mm, covered with rubber
    3) Linear speed: 1-8m/min (max)
    4) With 3 groups of slitters (air cylinder), which is 150mm in diameter
    5) Cross cutter is heating wire
    6) Photoelectric meter code
    7) Individual motor with variable frequency drive
    8) Installed power: 2.2kw