• Dây chuyền máy sản xuất Gòn tấm, gòn nệm

    - Mã sản phẩm: Dây chuyền sản xuất gòn tấm, gòn nệm

    Hard mattress, Non-adhesive Cotton Production Line 2500mm
     
    1. SN-KB016A-110 Bale Opener 3 sets
    Technical Specification:
    1. Working width: 1100mm
    2. Capacity: 50-200kg/h
    3. The speed of the evener roller: 350r/min and the speed of the stripper roller is 410r/min
    4. The outsite diameter of evener roller and stripper are Ф415mm with spike-tooth, each of 4 lines spike, fixed on the aluminum alloy blade. Both evener roller and striper are made by seamless steel tube. 
    5. The rotating speed of the spike lattice: 85r/min, made by aluminum alloy. 
    6. Linear speed of feeding: ≤5m/min
    7. The scalage is made of 2mm Aluminum Alloy with the volume 0.25m³.Also connected by sensors with electrical scalage.
    8. Installed power: 3.75kw
    9. The frequency of opening the bucket is less than 4n/min. 
     
    2. SN-YK016A-130 Pre opener                            1 set
    Technical Specification:
    1) Working width: 1300mm
    2) Capacity: 100-250kg/h
    3) The main cylinder is covered with sheep horn tooth, which is 460mm in diameter
    4) The driving motor of the cylinder is 5.5kw, and the max rotating speed is 900r/min
    5) The feeding motor is 1.1kw 
    6) With 4.5# fan to transmit and the fan motor is 2.2kw
    7) Installed power: 8.8kw
     
     
    3. SN-JK016A-130 Main opener                          1 set
    Technical Specification:
    1) Working width: 1300mm
    2) Capacity: 100-250kg/h
    3) The main cylinder is covered with pin board, which is 460mm in diameter
    4) The driving motor of the cylinder is 5.5kw and the max rotating speed is 900r/min
    5) Feeding motor is 1.1kw 
    6) With ten-angle plate and two straight rollers to feed
    7) With 4.5# fan to transmit and the fan motor is 2.2kw
    8) Installed power: 8.8kw
     
    4. SN-JM016A-170 Vibrating hopper feeder                1 set
    Technical Specification:
    1) Working width: 1700mm
    2) Capacity: 150-250kg/h
    3) The frame is made from Q235A-8mm steel sheet
    4) The diameter of the stripper and evener roller is φ40, which is equipped with 3φ300mm cast and galvanized flanges. 4 beaters are fixed on the roller by bolts
    5) The spike lattice and evener roller share one 1.5kw motor (with worm reducer). The stripper roller and oscillating deck share one 0.75kw-6 motor
    6) Photo electrically linked with the pre opener
    7) Installed power: 2.25kw
     
     
    5. SN-SLC1D2016A-185 Single cylinder double doffer carding machine        1 set
    Technical Specification:
    1) Working width: 1850mm
    2) Capacity: 150-200kg/h (based on 6D*51mm fiber)
    3) Output speed: 20-40m/min
    4) Diameter of the main cylinder φ1230mm, doffer is φ492mm, working roller is φ165mm, stripper roller is φ86mm
    5) Four roller to feed and with metal protection device. The feeding motor is 1.5kw, frequency controlled
    6) Doffer, random, stripper roller and working roller of the cylinder share one 3kw motor
    7) Installed power: 19.5kw
     
     
    6. SN-P016A-200*320 Cross lapper                      1 set
    Technical Specification:
    1) Input width: 2000mm
    2) Output width: 3200mm
    3) Input speed: 40m/min (max)
    4) Output speed: 6m/min (max)
    5) All frequency controlled and with position switches 
    6) The bottom lattice is the wooden one, the others are all PVC ones
    7) The reciprocation is controlled by the timing belt
    8) The bottom lattice is lifted manually
    9) Installed power: 7.4kw
     
     
    7. SN-PC016A-310 Electric Oven       1 set
    Technical Specification:
    1) Working width: 3100mm
    2) Length of heating compartment: 6 meters
    3) Available products weight: 80-400gsm
    4) Optional heating resource: burner (gas type)/ electric.
    5) Internal structure: two sets of  centrifugal blower installed against diagonal position, circulating air duct creating the blowing and inhaling airflow thru the products.
    6) Single conveying floor, the clamping conveyor covered with Teflon mesh belt, adjustable clearance height. NSK bearing adopted in cooling bearing pedestal, utilizing oil cooling.
    7) Output speed: 0.3m ~ 8m/min, variable speed
    8) Transmission power: transmission: 5.5kw motor with worm reducer; circulation fan: 18.5kw x2 (8# fan); elevator: 2.2kw
    9) TTL Installed power: ~44.7kw
     
     
    8. SN-PC016A-270 Slitting and winding machine                 1 set
    Technical Specification:
    1. Length of the roller:2700mm
    2. Diameter of the roller: 300mm, covered with rubber
    3. Linear speed: 1-8m/min (max)
    4. With 3 groups of slitters (air cylinder), which is 150mm in diameter
    5. Cross cutter is heating wire
    6. Installed power: 1.5kw